超低排放燃煤电厂颗粒物脱除特性 |
摘要点击 3737 全文点击 1236 投稿时间:2018-05-22 修订日期:2018-07-22 |
查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
中文关键词 超低排放 煤燃烧 烟气处理设备 颗粒物 水溶性离子 |
英文关键词 ultra-low emission coal combustion flue gas cleaning device PM water-soluble ion |
作者 | 单位 | E-mail | 阮仁晖 | 西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 西安 710049 | 2286027422@qq.com | 谭厚章 | 西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 西安 710049 | tanhz@mail.xjtu.edu.cn | 段钰锋 | 东南大学能源与环境学院, 能源热转换及其过程测控教育部重点实验室, 南京 210096 | | 杜勇乐 | 西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 西安 710049 | | 刘鹤欣 | 西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 西安 710049 | | 萧嘉繁 | 西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 西安 710049 | | 杨富鑫 | 西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 西安 710049 | | 张朋 | 西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 西安 710049 | |
|
中文摘要 |
在京津冀某660 MW超低排放发电机组,通过低压撞击器(DLPI)颗粒物取样系统对选择性催化还原装置(SCR)、低低温省煤器(LLTe)、静电除尘器(ESP)、高效湿法脱硫塔(WFGD)、湿式静电除尘器(WESP)进出口烟气中的颗粒物取样,通过滤膜取样系统对WFGD、WESP进出口颗粒物进行同步取样.获得了超低排放改造后,不同烟气处理设备对PM1、PM1~2.5、PM2.5~10的脱除效率.结果表明,SCR能够明显增加PM1的质量浓度,PM1增加了52.11%;LLTe能够显著提高ESP的脱除效率,尤其是0.1~1 μm范围内的颗粒物;WFGD能够协同脱除SO2和颗粒物,但会增加PM1的排放,PM1质量浓度增加了59.41%,PM10中水溶性Mg2+、Cl-、SO42-组分增加;WESP对PM1、PM1~2.5、PM2.5~10均有较高的脱除效率,能够进一步降低颗粒物质量浓度.超低排放技术路线下,该燃煤电厂最终排放的PM10质量浓度为2.04 mg·m-3. |
英文摘要 |
A 660 MW unit of an ultra-low emission coal-fired power plant in the Beijing-Tianjin-Hebei area was chosen for this study. The particulate matter was sampled with a Dekati low-pressure impactor (DPLI) at the inlet and outlet of flue gas cleaning devices including selective catalytic reduction (SCR), low-low temperature economizer (LLTe), electrostatic precipitator (ESP), wet flue gas desulfurization (WFGD), and wet electrostatic precipitator (WESP). A filter sampling system was also used at the inlet and outlet of the WFGD and WESP. The removal efficiencies of PM1, PM1-2.5, and PM2.5-10 from different flue gas cleaning devices were obtained after ultra-low emission modification. The results show that SCR increases the mass concentration of fine particulates and PM1 by 52.11%. The LLTe improves the removal efficiency of the ESP, especially for particles with a range of 0.1-1 μm. The high-efficiency WFGD removes both SO2 and particulates, but it increases PM1. The mass concentration of PM1 increases by 59.41% and the water-soluble Mg2+, Cl-, and SO42- in PM10 increases. The WESP has a high removal efficiency with respect to PM1, PM1-2.5, and PM2.5-10 and can further reduce the dust concentration. Based on an ultra-low emission reform, the final PM10 emission of this 660 MW unit is 2.04 mg·m-3. |
|
|
|