| ［omim］［PF6］萃淋树脂的制备及对萘吸附机制的研究 |
| 摘要点击 1616 全文点击 2361 投稿时间：2008-10-30 修订日期：2009-02-16 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 ［omim］［PF6］ 萃淋树脂 萘 吸附 影响因素 |
| 英文关键词 ［omim］［PF6］ solvent impregnated resin naphthalene adsorption impact factors |
|
| 中文摘要 |
| 将离子液体［omim］［PF6］以液膜的形式固定在大孔吸附树脂上，制备萃淋树脂，研究其对水相中萘的吸附及影响因素.结果表明,离子液体［omim］［PF6］萃取萘的过程，萘主要分配在［omim］+的疏水饱和碳链上；树脂和离子液体质量比为10∶1和20∶1的萃淋树脂，［omim］［PF6］在水相中的溶解明显小于2∶1和5∶1的萃淋树脂；不同质量比萃淋树脂对萘的饱和吸附量大小为10∶1萃淋树脂＞20∶1萃淋树脂＞树脂，对吸附等温线的拟合结果表明，树脂对萘的吸附更符合Freundlich吸附等温式，而萃淋树脂对萘的吸附则更符合Langmuir吸附等温式.不同温度萃淋树脂对萘的饱和吸附量大小为：20℃＞15℃＞25℃，随着pH的升高饱和吸附量下降，随着无机盐浓度的提高饱和吸附量均有提高；正交实验确定的最佳条件为:温度=30℃、pH=3、NaCl浓度=2 000 mg·L-1，其中pH值是最主要的影响因素. |
| 英文摘要 |
| Solvent impregnated resin was prepared by ［omim］［PF6］ immobilizied which as liquid film to macroporous absorption resin. The mechanism of solvent impregnated resin adsorbing naphthalene in aqueous phase and the impact factors were studied. The results showed that naphthalene was distributed in the hydrophobic saturated hydrocarbons of ［omim］+ in process of being extracted by ［omim］［PF6］; when the mass ratio of resin and ［omim］［PF6］ were 10∶1 and 20∶1,the solubility of ［omim］［PF6］ was less than that of 2∶1 and 5∶1; the sequence of saturated adsorbance of naphthalene with different solvent impregnated resin was q010∶1＞q020∶1＞q0resin; the adsorption of naphthalene by resin was according with Freundlich isotherm, but by solvent impregnated resin was accord with Langmuir isotherm; the saturated adsorbance ranked in a descending order as follows: 20℃, 15℃, 25℃; the saturated adsorbance were improving with the decline of pH and the increase of concentration of inorganic salts; the best condition was that: temperature was 30℃, pH was 3, the concentration of NaCl was 2 000 mg·L-1, and pH was the most important factor by orthogonal experiments. |
