首页  |  本刊简介  |  编委会  |  投稿须知  |  订阅与联系  |  微信  |  出版道德声明  |  Ei收录本刊数据  |  封面
树脂吸附法处理磺胺脒生产废水的工艺
摘要点击 1667  全文点击 1419  投稿时间:2002-12-26  修订日期:2003-03-10
查看HTML全文 查看全文  查看/发表评论  下载PDF阅读器
中文关键词  树脂吸附  磺胺脒生产废水  吸附  解吸
英文关键词  resin adsorption  sulfanilamide wastewater  adsorption  desorption
作者单位
许月卿 北京大学环境学院资源环境地理系,北京,100871 
彭应登 北京市环境保护科学研究院 北京100037 
赵仁兴 河北科技大学环境科学与工程学院 石家庄 050018 
中文摘要
      针对磺胺脒生产废水的特点,本研究确定了采用树脂吸附法回收磺胺、进一步回收硝酸钠的工艺流程,探讨了树脂对磺胺吸附-解吸的最佳工艺条件.结果表明:DRHⅢ型大孔吸附树脂对磺胺具有良好的吸附-解吸效果,能将有机物和无机物很好地分离.经树脂吸附处理后,废水中COD去除率86%,硝酸钠回收率95%,磺胺回收率86%,其纯度达99.8%.在废水有效处理的同时实现了废物资源化,具有良好的环境效益和较高的经济效益.
英文摘要
      According to the character of sulfanilamide production wastewater, in this paper, the recovery process of sulfanilamide, sodium nitrate in wastewater resulting from manufacturing sulfanilamide was developed by using macro porous resin. The conditions of the resin adsorption and desorption capacity were investigated and the optimal parameters were determined. The results of experiment indicated that this technique was suitable for removal of sulfanilamide from wastewater. About 86% COD removal was obtained under the optimized adsorption conditions, about 86% sulfanilamide and 95% sodium nitrate were recovered from wastewater for possible recycling to the manufacturing process and the recovered sulfanilamides purity reached 99.8%. The adsorption capacity of resin remained constant during the repetition process of adsorption and desorption. This technique not only eliminates the environmental pollution but also obtain distinct economic benefit.

您是第53228276位访客
主办单位:中国科学院生态环境研究中心 单位地址:北京市海淀区双清路18号
电话:010-62941102 邮编:100085 E-mail: hjkx@rcees.ac.cn
本系统由北京勤云科技发展有限公司设计  京ICP备05002858号-2