非均相催化湿式氧化法再生活性炭实验 |
摘要点击 1199 全文点击 1446 投稿时间:2002-07-06 修订日期:2002-09-09 |
查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
中文关键词 非均相催化湿式氧化 活性炭再生 最佳反应条件 |
英文关键词 heterogeneous catalytic wet oxidation activated carbon regeneration optimum reaction condition |
|
中文摘要 |
使用自制的CuO-Al2O3催化剂对苯酚饱和活性炭进行非均相催化湿式氧化再生研究,系统观察了反应条件对非均相催化湿式氧化再生活性炭的影响.实验中得到非均相CuO-Al2O3催化湿式氧化再生活性炭的最佳条件为:反应温度210℃,反应时间60min,催化剂投加量25mg(以铜离子计),反应氧分压0.6MPa(25℃),投炭量15g(干炭量),加水量300mL.通过对催化剂进行X衍射分析,并对催化剂的稳定性进行实验,可以得出该催化剂在催化湿式氧化再生活性炭的过程中具有较好的稳定性. |
英文摘要 |
The CuO Al2O3 catalyzer was used to heterogeneous catalytic wet oxidation regeneration of activated carbon, which adsorbed the phenol saturated. The study found the effect of reaction factors on activated carbon regeneration by heterogeneous catalytic wet oxidation. And the optimum reaction condition was reaction temperature 210℃, reaction time 60min, catalyzer dosage 25mg(calculated by Cu), reaction oxygen pressure 0.6MPa at 25℃, carbon 15g(dry carbon), distilled water 300mL. It was found that the catalyzer had good stability in this experiment by using X-rey radiation analysing catalyzer and experiment on catalyzer stability. |
|
|
|