| 发光菌生物毒性测试方法的改进 |
| 摘要点击 1736 全文点击 2323 投稿时间：2000-06-07 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 发光菌 生物毒性测试方法 校正因子 实验重复性 |
| 英文关键词 Photobacterium phosphoreum toxicity test correction factor laboratory repeatability |
|
| 中文摘要 |
| 针对发光菌发光强度本底差异较大,检测期间发光变化幅度宽的问题,在传统发光菌生物毒性测试实验中,引入校正因子(PI丙酮),研究了磁力搅拌时间、培养时间、培养代数和培养温度等条件对EC50测定值的影响.结果表明改进后的方法实验重现性好,相对标准偏差(RSD)在2.1%～13.1%之间.发光菌生物毒性测试方法的改进,为获得可靠的毒性实验数据,进行多组分有机化合物定量结构-活性相关(QSARs)的研究奠定了一定的实验基础. |
| 英文摘要 |
| In order to reduce the variation of Photobacterium phosphoreum luminous intensity during testing, the Photobacterium phosphoreum toxicity test was modified by a correction factor, PIacetone,in this paper. The effects of magnetic stirring time, culture time, culture generation and culture temperature on the measured results were discussed. The modified method had good laboratory repeatability and the relative standard deviation (RSD) was between 2.1% and 13 1%. Reliable data could be obtained using the modified method. It would be beneficial to the development of the quantitative structure-activity relationships on multicomponent organic compounds. |
|
|
|
