| 脉冲放电脱硫产物的收集 |
| 摘要点击 1718 全文点击 1838 投稿时间：1999-05-18 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 脉冲电晕放电 脱硫 产物收集(回收) 直流基压 |
| 英文关键词 pulsed corona discharge, SO2 removal, products collection, direct current bias voltage. |
|
| 中文摘要 |
| 实验结果表明利用给反应器加直流基压收集脱硫产物是可行的．产物收集效率随直流基压和停留时间的增加而增加，在本实验条件下，最高收集效率达到９５．１％ ．加直流基压后，脉冲电压、电流波形基本不变，放电增强，脱硫效果提高．加直流基压可使反应器在脱硫的同时有效收集产物． |
| 英文摘要 |
| The SO2 removal products were collected by the method of adding direct current bias voltage at pulsed corona discharge reactor. The experimental results show that this method is feasible. The collection efficiency increases with bias voltage and resident time rising. In this experiment, the collection efficiency is up to 95.1%. By adding direct current voltage, the pulse voltage and current waveform are not evidently changed, the pulse discharge is intensified, and the SO2 removal efficiency rises. Both high SO2 removal efficiency and effective collection of products were obtained by adding direct current bias voltage at the reactor. |
