污水快速渗滤处理系统水力负荷周期的设计 |
摘要点击 923 全文点击 912 投稿时间:1995-06-15 |
查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
中文关键词 快速渗滤 水力负荷 水力负荷周期 入渗速率 |
英文关键词 rapid infiltration hydraulic load hydraulic load cycle infiltration rate |
|
中文摘要 |
水力负荷周期是污水快速渗滤处理系统中最关键的运行参数。本研究在面积为80m2的啤酒废水现场中型试验中,分别得出了淹水期入渗速率递减曲线和落干期入渗速率恢复曲线,它们可分别用指数方程和对数方程来表达。据此提出了一种以追求最大水力负荷为目标时水力负荷周期的定量设计方法。将其应用于该次试验后得出的结果为1.78d淹水、2.77d落干。计算结果与实测结果比较表明,该方法是可行的。 |
英文摘要 |
Hydraulic load cycle is the most important operation parameter in rapid infiltration treatment system of waste water. The decrease curve and recovery curve of infiltration rate in flooding and drying periods.are obtained from the in situ test with the area of 80 m2 and flooded with brewery waste water. The curves can be expressed with exponential and logarithmic equations respectively. A quantitative method is proposed to determine the hydraulic load cycle with maximum hydraulic load. The calculated result is 1.78 days flooding and 2.77 days drying,very similar with the test results. |