| 聚乙烯醇包埋厌氧活性污泥处理废水的最优化条件研究 |
| 摘要点击 854 全文点击 1816 投稿时间：1994-01-14 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 聚乙烯醇(PVA) 厌氧活性污泥 固定化条件 废水处理 |
| 英文关键词 PVA anaerobic aludge wastewater treatment conditions for immobilization |
|
| 中文摘要 |
| 研究以聚乙烯醇为主要包埋材料的混合载体法固定厌氧活性污泥处理有机废水的最优化条件。混合载体由聚乙烯醇(PVA)、0.15%海藻酸钠,2%Fe粉,0.3%CaCO3、4%SiO2粉末组成。结果表明,PVA8%、初始污泥浓度15%时最适宜。凝固液饱和硼酸的pH对包埋效果有影响,用Na2CO3调节硼酸pH至6.7,可使包埋颗粒强度及产CH4活性提高。混合载体法有效地解决了固定化细胞技术应用于废水处理所面临的成球难、易破碎,活性丧失大及因产气而发胀上浮等问题。 |
| 英文摘要 |
| The optimized conditions under which anaerobic activated sludge was immobilized with a mixed carrier process using polyvinyl alcohol (PVA) as major entrapping material were studied. The mixed carrier consisted of PVA, 0.15% sodium alginated,2% Fe (iron powder), 0.3% CaCO3,and 4% silica gel. It was found that the optimum conditions were the concentration of 8% PVA and the initial concentration of 20% sludge. The pH value of boric acid solution had an effect on the immobilization and the use of sodium carbonate as pH adjusting agent allowed the boric acid in gel solution to have a pH of 6.7 which increased the strength of immobile phase and its activity of producing methane. This mixed carrier process effectively solved the problems that the immobilized cell technology applied in wastewater treatment faced, such as difficulty in forming spherical particles,ease of the particles to be broken, loss of the activity in producing methane,and floatation of the particles upon preducing methane. |
|
|
|
