首页  |  本刊简介  |  编委会  |  投稿须知  |  订阅与联系  |  微信  |  出版道德声明  |  Ei收录本刊数据  |  封面
人工钙基脱硫剂活性和温度特性的研究
摘要点击 765  全文点击 756  投稿时间:1992-02-21  
查看HTML全文 查看全文  查看/发表评论  下载PDF阅读器
中文关键词  沸腾炉固硫渣  流化床锅炉  二氧化硫  脱硫  人工钙基脱硫剂
英文关键词  fluidized bed boiler  fluized bed combustion  sulfur dioxide  desulfurization  limestone  synthetic sorbent
作者单位
黄信仪 清华大学热能工程系 北京 100084 
李志江 清华大学热能工程系 北京 100084 
张绪祎 清华大学热能工程系 北京 100084 
中文摘要
      脱硫剂的活性和温度特性是影响沸腾炉煤燃烧脱硫效率的两个重要因素。实验表明,以石灰石为有效成分的人工钙基脱硫剂的反应活性是石灰石的2—3倍,且在800℃—1100℃较宽的温度范围内保持这一水平.本文以石灰石和两种人工脱硫剂试样(含固硫渣和不含固硫渣)为研究对象,应用管式反应炉、扫描电子显微镜和压汞仪等对样品进行了一系列宏观与微观的对比实验,探讨了人工脱硫剂的活性和温度特性.结果表明,在人工脱硫剂成型过程中人为形成的大孔分布改善了反应气体的扩散,从而提高了它的反应活性。而且大孔和固硫渣的共同作用还削弱了晶粒膨胀和烧结的不利影响,从而使其最佳脱硫温度较石灰石向高温区移动了近200℃.此外本文还讨论了最佳温度的相对性。
英文摘要
      The reactivity and temperature-characteristic of sorbent are two criticial factors affecting sulfur-capture efficiency in the process of fluidized bed combustion of coal. The synthetic sorbent developed by the authors, although mainly consisting of limestone fines, possesses higher reactivity than the limestone itself and could be used in a wider range of temperature up to 1100C. In order to study the phenomenon, experiments were conducted by using a fixed bed reactor, a mercury porosimeter and a scanning electrinic micro-scope etc. Two kinds of synthetic sorbents (with and without sulfur-retentive ash) and limestone were used in the study. Results demonstrate that large pores in the synthetic sorbents, wich were formed in the process of agglomeration, enhanced the diffusion of SO2 and O2 and, therefore, led to the high reactivity of the sorbent. In the meantime, sulfur-retentive ash deferred the ocurrance of sintering and thus made the optimum temperature shift to a high level.

您是第53321128位访客
主办单位:中国科学院生态环境研究中心 单位地址:北京市海淀区双清路18号
电话:010-62941102 邮编:100085 E-mail: hjkx@rcees.ac.cn
本系统由北京勤云科技发展有限公司设计  京ICP备05002858号-2