| 电子产品加工制造企业挥发性有机物(VOCs)排放特征 |
| 摘要点击 3476 全文点击 1538 投稿时间：2013-03-15 修订日期：2013-04-24 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 电子产品 加工制造 挥发性有机物 涂装 排放特征 |
| 英文关键词 electronic products processing and manufacturing volatile organic compounds (VOC) painting process source profile |
|
| 中文摘要 |
| 根据美国EPA挥发性有机物标准检测法TO-11及TO-14/15,采用VOCs快速检测仪、Summa罐及DNPH吸附管,对我国某大型电子产品加工制造企业中不同工艺环节生产车间内部及生产线最终废气排放管道中VOCs含量水平及组分特征进行检测. 结果表明,该企业涉及VOCs排放工艺中压铸车间总挥发性有机物(TVOCs)浓度为0.1~0.5 mg·m-3、机加工车间TVOCs浓度为1.5~2.5 mg·m-3、喷涂车间中TVOCs浓度为20~200 mg·m-3,各车间VOCs组分主要包括烷类、烯炔类、芳香类、酮类、酯类和醚类,共20余种. 其中涂装车间内苯系物及酮类物质为主要VOCs组分,各物质浓度分别为苯0.02~0.34 mg·m-3、甲苯0.24~3.35 mg·m-3、乙苯0.04~1.33 mg·m-3、对二甲苯0.13~0.96 mg·m-3、邻/间二甲苯0.02~1.18 mg·m-3、丙酮0.29~15.77 mg·m-3、2-丁酮0.06~22.88 mg·m-3、环己酮0.02~25.79 mg·m-3、甲基异丁基甲酮0~21.29 mg·m-3. 根据该企业生产特征及工艺数据计算,其单条生产线VOCs年排放量为14 t,整个厂区年排放量约为840 t. 结合生产流程及生产工艺分析,喷涂过程中的溶剂使用是电子产品加工制造企业的VOCs主要排放来源,废气排放口是重点排放点. |
| 英文摘要 |
| Based on the EPA method TO-11 and 14/15 for measurement of toxic organics in air samples, fast VOCs detector, Summa canister and DNPH absorbent were used to determine the VOCs concentrations and the compositions in the ambient air of the workshops for different processes as well as the emission concentration in the exhaust gas. In all processes that involved VOCs release, concentrations of total VOCs in the workshops were 0.1-0.5 mg·m-3, 1.5-2.5 mg·m-3 and 20-200 mg·m-3 for casting, cutting and painting respectively. Main compositions of VOCs in those workshops were alkanes, eneynes, aromatics, ketones, esters and ethers, totally over 20 different species. The main compositions in painting workshop were aromatics and ketones, among which the concentration of benzene was 0.02-0.34 mg·m-3, toluene was 0.24-3.35 mg·m-3, ethyl benzene was 0.04-1.33 mg·m-3, p-xylene was 0.13-0.96 mg·m-3, m-xylene was 0.02-1.18 mg·m-3, acetone was 0.29-15.77 mg·m-3, 2-butanone was 0.06-22.88 mg·m-3, cyclohexene was 0.02-25.79 mg·m-3, and methyl isobutyl ketone was 0-21.29 mg·m-3. The VOCs emission from painting process was about 14 t·a-1 for one single manufacturing line, and 840 t·a-1 for the whole factory. According to the work flows and product processes, the solvent used during painting process was the main source of VOCs emission, and the exhaust gas was the main emission point. |
|
|
|
