| 纳米四氧化三铁对2,4-D的脱氯降解 |
| 摘要点击 5021 全文点击 2943 投稿时间：2009-07-29 修订日期：2009-12-04 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 纳米Fe3O4 2,4-D 脱氯降解 动力学 降解产物 |
| 英文关键词 nanoscale Fe3O4 2,4-dichlorophenoxyacetic acid dechlorinated degradation kinetics degradation products |
|
| 中文摘要 |
| 采用纳米四氧化三铁(Fe3O4)降解水溶液中的2,4-二氯苯氧乙酸(2,4-D),考察了2,4-D初始浓度、纳米Fe3O4投加量、溶液pH和温度等因素对2,4-D降解率的影响.结果表明,纳米Fe3O4对2,4-D有显著的降解效果,初始浓度为10 mg/L的2,4-D, 48 h内降解率可达48%.纳米Fe3O4对2,4-D的降解是一个还原脱氯过程,反应体系中氯离子浓度随2,4-D浓度降低而升高.LC/MS分析表明,2,4-D降解的主要产物是苯酚，其他中间产物是2,4-二氯苯酚（2,4-DCP）、4-氯苯酚(4-CP)和2-氯苯酚(2-CP).溶液中2,4-D的降解符合准一级反应动力学,产物4-CP、2,4-DCP和苯酚的反应速率常数K分别为0.0043、0.0026和0.0032 h-1.环境条件对降解效率有显著影响,2,4-D初始浓度在0～10 mg/L、纳米Fe3O4投加量0～300 mg/L的范围内,2,4-D降解率随初始浓度和纳米Fe3O4投加量的增加而增大；pH对2,4-D的脱氯降解有显著影响,在pH为3.0时,纳米Fe3O4对2,4-D的还原脱氯效果最好；温度升高,可以提高脱氯反应速率. |
| 英文摘要 |
| Reductive transformation of 2,4-Dichlorophenoxyacetic acid (2,4-D) by nanoscale Fe3O4 was studied, and the effects of 2,4-D initial concentration, the dosage of nanoscale Fe3O4, pH and temperature on degradation rate of 2,4-D were investigated. The results showed that 48% 2,4-D with initial concentration of 10 mg/L was transformed within 48 h in the presence of 300 mg/L nanoscale Fe3O4. The degradation of 2,4-D was a reductive dechlorination process, and the concentration of chloride ion increased sharply with the degration of the 2,4-D. Disappearance of parent species and formation of reaction intermediates and products were analyzed by LC/MS. The transformation of 2,4-D followed a primary pathway of its complete reduction to phenol and a secondary pathway of sequential reductive hydrogenolysis to 2,4-dichlorophenol (2,4-DCP), 4-chlorophenol (4-CP) or 2-chlorophenol (2-CP) and phenol. The degradation equations of 2,4-D by nanoscale Fe3O4 conformed to pseudo-first-order kinetics, and the reaction rate constant (K) of 4-CP, 2,4-DCP and phenol were 0.0043 h-1, 0.0026 h-1 and 0.0032 h-1, respectively. The degradation rate increased with an increase in initial concentration of 2,4-D from 0 mg/L to 10 mg/L, and increasing the dosage of nanoscale Fe3O4 from 0 mg/L to 300 mg/L. The pH of reaction solution significantly influenced reductive degradation of 2,4-D, and the optimum pH value was 3.0. Besides, high temperature could improve dechlorination rate of 2,4-D. |
|
|
|
