| 新型填充式空气净化器净化甲醛效果与计算模拟 |
| 摘要点击 2126 全文点击 2633 投稿时间：2007-09-24 修订日期：2007-11-22 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 空气净化器 室内空气 甲醛 净化 模拟 |
| 英文关键词 air purifier indoor air formaldehyde purification simulation |
|
| 中文摘要 |
| 针对室内空气低浓度甲醛污染，设计填充附着纳米二氧化钛玻璃珠(3 mm)空气净化器，并在密闭房间内对其净化效果进行实验分析.结果表明，甲醛初始浓度为0.727～1.815 mg/m3时，甲醛减少87.0%～93.8%，并建立了该空气净化器的反应速率方程.通过计算模拟，证实了净化器单个装置空气分布的均匀性.此外，还根据质量平衡建立了有甲醛持续释放污染房间内应用空气净化器后，甲醛浓度变化的数学模型，并通过实验验证了模拟结果的正确性.结果表明，间歇性应用此空气净化器可维持室内甲醛浓度低于国家空气质量标准0.1 mg/m3. |
| 英文摘要 |
| A novel air purifier was designed for the removal of indoor formaldehyde. The air purifier was filled with glass beads (3 mm) coated with TiO2. The removal efficiency of this air purifier was examined in an airtight room. The results showed that 87.0%-93.8% of the formaldehyde was removed for the initial formaldehyde concentration of 0.727-1.815 mg/m3 . The reaction rate equation of the air purifier was developed. The simulation of single device of the air purifier suggested the uniformity of the air flow in the device. Besides, a mathematical model to simulate the variation of formaldehyde in a room was constructed, in which there was continuous formaldehyde emission source and the air purifier was operated. The simulation result was also proved by the experimental data. The results revealed that using the air purifier at intervals could steadily keep the formaldehyde concentration below the National Air Quality Standard of China, i.e. 0.1 mg/m3. |
