TiO2投加量及其表面载银量对光催化降解Aro-clor1260的影响 |
摘要点击 1115 全文点击 1101 投稿时间:2000-11-24 修订日期:2001-03-15 |
查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
中文关键词 TiO2 载银 Aroclor1260 PCB单体化合物 光催化降解 |
英文关键词 TiO2 surface loaded silver Aroclor1260 the PCBs congeners photocatalytic degradation |
作者 | 单位 | 李春雷 | 中国科学院广州地球化学研究所有机地球化学国家重点实验室,广州,510640 | 麦碧娴 | 广东省环境资源利用与保护重点实验室,广州,510640 | 潘海祥 | 中国科学院广州地球化学研究所有机地球化学国家重点实验室,广州,510640 | 林峥 | 中国科学院广州地球化学研究所有机地球化学国家重点实验室,广州,510640 | 盛国英 | 中国科学院广州地球化学研究所有机地球化学国家重点实验室,广州,510640 | 傅家谟 | 中国科学院广州地球化学研究所有机地球化学国家重点实验室,广州,510640 |
|
中文摘要 |
在紫外灯照射下,催化剂TiO2的投入量及其表面载银量对光催化降解Aroclor1260有显著的影响.但TiO2的投入量并不与Aroclor1260的降解速率成正比关系,而是有一个最佳投入量,在本文的实验条件下,这个最佳值为60mg(3g/L).TiO2的表面载银量越多,Aroclor1260的降解速率也越大,而且浓度相对较高的PCB单体化合物的降解速率大于浓度相对较低的PCB单体化合物的降解速率.对于多数PCB单体化合物而言,TiO2的催化活性随其表面载银量的增加而增强. |
英文摘要 |
The dosage of TiO2 and its surface loaded silver had notable effect on the photocatalytic degradation of Aroclor1260, under ultraviolet light. The dosage of TiO2 had no proportion to the degradation rate of Aroclor1260, but had an optimal value, which was 3g/L under the experimental condition. The degradation rate of Aroclor1260 increased with the increasing of loading silver, and the PCBs congeners with higher concentration had higher degradation rate. The catalytic activity of TiO2 increased with the amount of loading silver increasing. |
|
|
|