聚硅氯化铝(PASC)混凝剂的混凝性能 |
摘要点击 1402 全文点击 1663 投稿时间:1999-07-17 |
查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
中文关键词 聚硅氯化铝(PASC) 混凝剂 混凝效果 |
英文关键词 polyaluminum silicate chloride (PASC), coagulant, coagulation. |
|
中文摘要 |
研究Al/Si摩尔比及制备工艺对聚硅氯化铝(PASC)混凝效果的影响,比较PASC和聚合氯化铝(PAC)的混凝效果.结果表明,PASC较PAC混凝效果好.Al/Si摩尔比和制备工艺对PASC的混凝效果有影响.用共聚法制备的PASC(共),Al/Si摩尔比降低,其混凝效果提高,但复合法制备的PASC(复),Al/Si摩尔比过高或过低,均不利于其混凝效果的提高,PASC(共)的混凝效果稍优于PASC(复)的混凝效果. |
英文摘要 |
The effect of Al/Si molar ratio and the preparation technique on the coagulation of polyaluminum silicate chloride (PASC) was studied, and the coagulation efficiency of PASC was also compared with that of polyaluminum chloride (PAC) by jar test. The experimental results show that PASC is characterized by having better coagulation efficiency, compared with PAC. The PASC prepared by copolymerization technique give a little better coagulating effect than PASC prepared by composite technique under the same Al/Si molar ratio. For the PASC prepared by copolymerization technique, in the range of Al/Si=5~15, the less the Al/Si molar ratio, the better the coagulation efficiency. For the PASC prepared by composite technique, however, the PASC with molar ratio of Al/Si=10 gives best coagulation efficiency. |
|
|
|