| 苯酚在预活化聚酰胺膜酪氨酸酶生物传感器上的响应特性 |
| 摘要点击 954 全文点击 1131 投稿时间：1994-11-23 |
| 查看HTML全文
查看全文 查看/发表评论 下载PDF阅读器 |
| 中文关键词 电极 生物传感器 酶 酪氨酸酶 苯酚 |
| 英文关键词 electrode biosensor enzyme tyrosinase phenol |
|
| 中文摘要 |
| 研究苯酚在预活化聚酰胺膜酪氨酸酶生物传感器上的响应特性,适量儿茶酚的存在可加快传感器到达恒态的速度。被固定酶的量、活性及传感器的有效面积等是影响检测灵敏度的主要因素。首次采用预活化聚酰胺膜固定酪氨酸酶,并与浸蜡石墨电极组合成酪氨酸酶生物传感器,在温度25℃电位—0.200VvsSCE,儿茶酚浓度5×10-7mol/L,底液0.1mol/L磷酸盐缓冲溶液pH6.50下,采用电流法测定苯酚及水样中的酚。酶膜的制备、替换和贮存极为方便,酶膜贮存5个月未见活性下降,有良好的重现性和线性范围2×10-7—1.25×10-5mol/L。 |
| 英文摘要 |
| The response time decreases in the presence of catechol. The principal factors influencing the sensitivity were described. The amperometric biosensor of tyrosinase was prepared firstly by immobilizing tyrosinase onto preactivated polyamide support which contacted tightly with wax-impregnated graphite elbotnde.Amperotnetric measurements of phenol in water were carried out by applying a potential of-0.200 VvsSCE in a 0.1 mol/L phosphate buffer of PH6.50 and 5×10-7 mol/L catechol at 25℃. The preparation, storage and replacement of immobilized enzyme are convenient. No activity of immobilized enzyme was lost during five months of storage, with linear range of 2×10-7—1.25×10-5 mol/L of phenol. |
|
|
|
